It can be widely applied in main road, highways, bridges and roads, urban streets, docks, airports, gas stations, oil fields, industrial areas, squares, schools, parks, gardens, residential areas and other outdoor lighting

Introduction

First high power LED street light developed and die-casting mass production in China; First high power LED street light obtained international standard ROHS certification.

Components&Material

Vacuum coating reflector，aluminum reflector cavity、lamp body and heat dissipation body；high-strength PC enclosures

Part No.	JG-HPLED-LD120
Input voltage	AC	AC 175—245 V / 50 Hz
	DC	DC 12V/24V/36V（optional）
Wattage	120W
Power factor	≥0.99
Color rendering	R ≥ 83
Color temperature	2700—6500 K
Replaced light	400W HPS light	400W metal halogen lamp
Mounting height	8-10m	elevation	15^o
Center illuminance	36lux
Luminous efficiency	100lm/W
Luminous flux	983Olm
Illumination range	Pole height 10M： 30M*16M
Working temperature	-40～55℃
Life span	>50,000 h
Light weight	12kg
Heat dissipation	Light source＜60℃

1. Chinese fist mass-produced die-casting high power LED street lights, patented product

2. Light source imported from American CREE, 3W/chip, 100lm/W. Patented packaging technology and saving energy by more than 70% than traditional lights.

3. Clever and reasonable second optical design with built-in and multi-angle light plane. The light source utilization could be reach up to over 98% and the effective illumination area is very wide. It could be assembled to any different power and brightness LED street light and partial failure would not affect the normal working.

4. AC/DC constant current driver，universal input voltage。With anti-surge, overload and short circuit protection etc.

5. Intelligent control system：could realize light control, temperature control and time control etc. It would automatically change to half-power working when traffic reduces in the late midnight with 70% of .luminous.

6. Excellent color rendering, soft light. No glaring, visual fatigue and interference.

7. Aluminum radiator with high thermal conductivity，light integrated with radiator shell to make sure the temperature of LED light source is less than 60℃ and achieve the convection between heat source and nature air。

8. Safety：metal lamp body , shock-proof and earthquake-proof； oxidation，resisting salt-acid and salt spray corrosion，anti-UV aging。PC for lamp cover，sturdy and durable, no harm and radiation to human health. Defending rate is up to above IP66, good sealing performance and good capacity of dust proof, waterproof and anti-lighting surge.. Using low voltage and DC power supply, there is no any dangerous in public.

9. Longer life：up to 50000 hours with less than 20% consumption.

10.Perfect combination with solar Energy: Fully exert the advantage of LED light like working under low voltage and environmental protection. electricity and solar power can also be combined according to the local solar energy resources, achieving the best cost performance and high reliability for customers.

Street Types	LED Street Light	High Pressure Sodium Lamp
Ballast	No	Yes (Increase Power Consumption??/span>
Actual Power Consumption	72w	287w
Light Source Life	50000 hours	3000 hours
Calorific Value	Low (60??	High ??/span>300 ??/span>)
Anti-vibration	High Shockproof	Fragile
Color Rendering	High ≥80	Low ≤30
Strobe Frequency	No	Yes
Light Pollution	No, light angle set, scientific lighting	Yes, full body light-emitting
Color Temperature	2300-6500K	2300-2700K
Luminous Flux	Higher than high pressure sodium lamp, the utilization rate is over 98%	Higher than other lights??/span>the utilization is only 60%
Response Speed	Nano second	Minute class
Starting Ability	Excellent, without starter	Poor, increase 60% power consumption
Security	Safety, low temperature, low power consumption	High temperature, high voltage
Light Decay	Low	High
Maintenance Charge	Low	High

PREV: LED street light

NEXT: LED street light